Mitsubishi Electric MELSEC iQ-R Series User Manual page 284

Error code Error name
1FC4H Binary file creation error
1FCAH to File creation error
1FCBH
1FCCH Directory creation error
1FCDH File access error
1FD3H File check error
1FD4H File open error
1FD5H File write error
1FD6H File open error
1FD7H File information acquisition error
1FD8H to 1FDEH File access error
1FE1H to 1FE4H Report source file error
1FE5H to 1FE6H Module error
1FE7H Unicode text file write error
1FF0H Saved file name acquisition
error
1FF1H Saved file name acquisition
error
1FF2H Saved file name acquisition
error
1FF3H Saved file name acquisition
error
1FF4H to 1FF6H File write error
4 TROUBLESHOOTING
282
4.4 Error Code List
Error description
Failed to create the binary file.
Failed to create the file.
Failed to create the directory.
An error occurred when accessing the file.
Failed to check the file.
Failed to open the file.
Failed to write the file.
Failed to open the file.
Failed to acquire the file information.
An error occurred when accessing the file.
Data logging file to be output to the report file
cannot be found.
A module error has been detected.
Failed to write the Unicode text file.
Failed to acquire the saved file name.
Failed to acquire the saved file name.
Failed to acquire the saved file name.
Failed to acquire the saved file name.
Failed to write the file.
Corrective action
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Check if the file was deleted by external FTP.
• Replace the SD memory card.
• Configure and construct the system so that the
creation trigger occurs after the specified
number of records worth of data is saved in the
data logging file.
• Adjust the file switch timing for data logging.
• Check if the data logging file is being deleted
before the report is output.
• Replace the SD memory card.
• Take measures to reduce noise.
• Reset the CPU module and switch it to RUN. If
the same error is displayed again, a hardware
failure may occur in high speed data logger
module. Please consult your local Mitsubishi
representative.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Check if the file is being deleted.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.
• Write the settings again with the Configuration
Tool.
• Replace the SD memory card.
• Delete unnecessary files on the SD memory
card to ensure free space.
• Replace the SD memory card.