Mitsubishi Electric MELSEC iQ-R Series User Manual page 215

Find high speed data logger module
Search the high speed data logger module on the network that belongs to the configuration computer.
Operating procedure
1.
Click the [Find high speed data logger module on the network] button on the "Transfer setup" screen.
2.
Select from the list, the high speed data logger module for connection.
3.
Click the [OK] button.
The first line (up to 160 characters) up to the comment line feed of the project written in the module is
displayed in "Comment."
Precautions
When more than one high speed data logger module having same IP address are displayed, multiple high speed data logger
modules with the same IP address may exist on the same network. Correct the IP address of each high speed data logger
module.
The high speed data logger module cannot be searched normally in the configuration where multiple IP addresses are
enabled at the same time, in the configuration computer.
• IP addresses are assigned to each of multiple Ethernet ports of a configuration personal computer.
• When a wireless LAN setting is enabled in addition to Ethernet port of the configuration personal computer
• Multiple IP addresses are assigned to a single network device (Ethernet port) of a configuration personal computer.
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
2
213
2.8 Online