Mitsubishi Electric MELSEC iQ-R Series User Manual page 139

File transfer setting
Configure the detailed settings to use the file transfer function of a high speed data logger module.
Window
Click the [Edit] button on the file transfer setting list.
■[Type] tab
Item
FTP server
Shared folder
[Back] button
[Next] button
[Finish] button
■[FTP server] tab
Item
Host name
User name
Password
Confirm password
Path
FTP port number
Data transfer mode
*1 When set with a domain name, the DNS server must be set in "DNS server setting" of the Network settings.
*2 The transfer destination folder is not created. Create the transfer destination folder in advance.
If the transfer destination folder does not exist, an error occurs during file transfer.
*3 Use '/' or '\' as the delimiter between directories.
*4 Normally select the "PORT mode." Select "PASV mode" when communications with the FTP server are only allowed in "PASV mode" by
Windows firewall or other firewalls.
Description
Select this to transfer the file to FTP server.
Select this to transfer the file to the shared folder.
Moves back to the previous setting tab.
Moves forward to the next setting tab.
Reflects the settings.
Description
Set the host name of the file transfer destination as an IP address or domain name. (Up to 64 characters)
Set the login user name to the file server. (Up to 32 characters)
Set the login password to the file server. (Up to 16 characters)
Set the login password again for verification. (Up to 16 characters)
Set the file directory path of the file transfer destination. (Up to 64 characters)
Set the port number to be used to access the FTP server.
Select the data transfer mode of the FTP server.
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
*2*3
*4
*1
137
2.4 Common Setting
2