Online data operation
Read, write, and verify the settings (project).
Read
Read the settings from the high speed data logger module set in "Transfer setup."
Operating procedure
Select [Online] [Read].
Write
Write the settings to the SD memory card in the high speed data logger module which is set in "Transfer setup."
Operating procedure
Select [Online] [Write].
Precautions
While the write (update settings) processing is being performed, all functions including the data logging function, event
logging function, and report function stop.
Network settings cannot be reflected by only performing the data write. Update the settings by performing one of the following
operations.
• "Update settings" of module diagnostics (Page 216 Module diagnostics)
• Turning ON from OFF or resetting the CPU Module
Verify
Verify the settings for the project being edited and settings for the high speed data logger module which is set in "Transfer
setup."
Operating procedure
Select [Online] [Verify].
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
214
2.8 Online