Access Target Cpu Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

Access target CPU setting

Configure the CPU module that accesses a high speed data logger module.
Window
Click "Common setting" on the edit items tree, then click the [Access target CPU setting] button.
Displayed items
Item
CPU name
Station specification
Network route
Co-existence network route
Multiple CPU specification
Response monitoring time
Import setting
[Edit] button
[Delete] button
*1 Not valid when "Control CPU" is selected.
The following conditions may affect the general sampling, file transfer function, and e-mail function.
• When the CPU which does not exist in the access target CPU is set.
• When the high speed data logger module cannot communicate with the access target CPU temporary
because of the power interruption of access target CPU or network failure.
Use high speed data logger modules with the status that can communicate with the CPU module set as
access target CPU.
Page 315 General sampling delay time area (Un\G800 to 805)
Description
Displays the access target CPU name.
Displays the station (own/other) specified for access target CPU.
Displays the accessed network information when another station is specified.
Displays the co-existence network information for accessing a co-existence network when another station is specified.
Displays the CPU number when the access target CPU is a multiple CPU.
Displays the response monitoring time when accessing the target CPU.
Displays the settings of "Global label/Common device comment import setting" screen.
Displays the setting screen to edit the selected access target CPU setting.
Page 134 Access target CPU setting
Deletes the selected access target CPU setting.
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
*1
133
2.4 Common Setting
2