Mitsubishi Electric MELSEC iQ-R Series User Manual page 161

Trigger (compound condition)
Window
Displayed items
Item
Trigger type OR combine
AND combine
Number of times
Order
Conditions for When a terminal
*1
occurrence condition holds true
When a specified number
of times is exceeded
Conditions for the
occurrence of a trigger
Selecting conditions for Abnormal pattern is
*2
occurrence detected
Normal pattern is
detected
Detect timeout
Condition list Type
Contents of settings
Start condition
Terminal condition
Count condition
Start condition
1st/2nd/3rd condition
Monitoring timeout
[Second]
[Edit] button
[Delete] button
[Period setting] button
Notify the logging completion
Data name
*1 Displayed in the case of "Number of times."
Description
Select this to make a trigger occur when one of the specified conditions is satisfied.
Select this to make a trigger occur when all the specified conditions are satisfied.
Select this to monitor the number of times of the condition satisfaction, and make a trigger occur.
Select this to make an trigger occur by monitoring the order of the condition satisfaction.
Select this to check the number of counts when the termination condition is satisfied, and make a
trigger occur when the specified condition is satisfied.
Select this to make a trigger occur immediately when the number of counts exceeds the specified
count.
Specify the conditions (comparison operator and number of times) to compare the number of times the
count condition is satisfied (number of counts).
Select this to make a trigger occur if the condition is satisfied with a order different from the specified
one.
Select this to make a trigger occur if the condition is satisfied with the specified order.
Select this to make a trigger occur when any of the conditions are not satisfied within the monitoring
timeout.
Displays the condition type.
Displays the overview of the condition.
*1
Displays the condition to start counting for the number of counts.
*1
Displays the condition to stop counting for the number of counts.
*1
Displays the condition to increment the number of counts.
*2
Displays the condition to start monitoring the order that the condition is satisfied.
*2
Displays the conditions to monitor in order.
Displays the timeout time when monitoring the conditions in each order.
*2
Displays the setting screen to edit the selected condition.
The settings are same as mentioned in the following section.
Page 158 Trigger condition setting
Deletes the selected condition.
Specify the trigger monitoring period.
Page 155 Period
Select this to turn ON the specified bit device after a trigger occurred and a logging is completed.
Select the data to be turned ON when the logging is completed.
To add data, select "(Add)" and click the [...] button.
Page 112 Data setting
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
*3*4
2.5 Data Logging Setting
2
159