Mitsubishi Electric MELSEC iQ-R Series User Manual page 327

■Report creation execution information (Un\G4008 to 4011)
Information related to the report creation execution status is stored.
The bit corresponding to the report setting that executes report creation turns ON.
0: Report creation is not executed
1: Report creation is executed
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
16 15 14 13 12 11
Un\G4008
Un\G4009 32 31 30 29 28 27
Un\G4010 48 47 46 45 44 43
Un\G4011 64 63 62 61 60 59
The time required to create a report is as follows.
• After a creation trigger occurs, the corresponding bit turns ON from when the report creation is completed to the next
monitoring cycle.
■Report creation error information (Un\G4012 to 4015)
The report creation error information is stored.
The bit corresponding to the report setting where an report creation error is occurring turns ON.
0: No report creation error
1: Report creation error
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
Un\G4012 16 15 14 13 12 11
Un\G4013 32 31 30 29 28 27
Un\G4014 48 47 46 45 44 43
Un\G4015 64 63 62 61 60 59
Ex.
When an error occurs in the report creation execution of report setting No.16
'Report creation error' (X14) turns ON.
The 15th bit in the 'report creation error information area' (Un\G4012) turns ON.
The error code is stored in the 'error code' (Un\G4255) of report creation information 16.
• For the cause of an error occured, check an error code stored in the report creation information 1 to 64
(Un\G4030 to 4989). (Page 326 Report creation information 1 to 64 (Un\G4030 to 4989))
• If there are multiple report settings with a common access target CPU set for logging, and when an error
related to the CPU occurs, only the corresponding bit of the setting number of report in which the error
occurred at the first time may turn ON.
■Number of saved files exceeded information (Un\G4016 to 4019)
The information indicating the number of saved files is exceeding the set number of files is stored.
If the operation when the number of saved files exceeds the set number of files is set to "Stop", the system will show inability
to create new files when creating a new file after the number of saved files reached the set number of files.
The bit corresponding to the report setting whose number of saved files is exceeding turns ON.
0: Within setting range
1: Setting exceeded
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
Un\G4016 16 15 14 13 12 11
Un\G4017 32 31 30 29 28 27
Un\G4018 48 47 46 45 44 43
64 63 62 61 60 59
Un\G4019
To continue logging, delete old files or all files in the directory.
When the number of saved files is less than the set number of files, the corresponding bit turns OFF.
10 9 8 7 6 5 4 3 2
26 25 24 23 22 21 20 19 18
42 41 40 39 38 37 36 35 34
58 57 56 55 54 53 52 51 50
10 9 8 7 6 5 4 3 2
26 25 24 23 22 21 20 19 18
42 41 40 39 38 37 36 35 34
58 57 56 55 54 53 52 51 50
10 9 8 7 6 5 4 3 2
26 25 24 23 22 21 20 19 18
42 41 40 39 38 37 36 35 34
58 57 56 55 54 53 52 51 50
1
17
33
49
1
17
33
49
1
17
33
49
APPX
Appendix 3 Buffer Memory
A
325