Mitsubishi Electric MELSEC iQ-R Series User Manual page 142

• Calculating resend buffer size
Calculate the resend buffer size using the following equation.
Usage area [MB] = (14 [KB]  Number of files) / 1024
• Setting resend buffer size
Depending on the size of free space in the SD memory card, the specified size for resend buffer may not be
reserved in the SD memory card.
• Based on the specified maximum size for resend buffer, spaces in the SD memory card are occupied
according to the number of buffered data.
• The SMTP server name needs to be set with an IP address when using the resend function.
Authentication setting
Set authentication settings to send an e-mail.
Window
Click the [Authentication setting] button on the "E-mail setting" screen.
Displayed items
Item
This server requires authentication.
Method of authentication
User name
Password
Confirm password
POP server name
POP port number
[OK] button
*1 Set the authentication method according to the mail server.
*2 Required when the authentication method is set to "POP before SMTP."
2 HIGH SPEED DATA LOGGER MODULE CONFIGURATION TOOL
140
2.4 Common Setting
Description
Select this to authenticate when sending an e-mail.
Select the authentication method when sending e-mail.
Set the mail server user name used for authentication when sending e-mail. (Up to 32 characters)
Set the mail server password used for authentication when sending e-mail. (Up to 16 characters)
Enter the password again for verification.
Set the POP server name. (Up to 64 characters)
Specify the port number when accessing the POP server.
Reflects the settings and closes the screen.
*1
*2
*2