HPE Nimble Storage HF Series Hardware Manual page 89

1 Controller release lever
2 Controller release lever catch
3 Thumbscrew - PCIe cage release
4 Thumbscrew - PCIe card release
3. Remove the PCIe cage.
a) Loosen the bottom thumbscrew on the PCIe cage.
Important:
For HPE Alletra 5010 or Nimble Storage AF20 and HF20 models you must also remove the transparent
controller shroud from the controller.
1 Controller shroud
2 PCIe cage
b) For HPE Alletra 5010 or Nimble Storage AF20 and HF20 models: Grasp both sides of the PCIe cage and lift the
cage out of the controller, making sure that the cage clears the guide pins and that both riser cards and the bridge
board connector are properly unseated.
5 PCIe card slot 1
6 PCIe card slot 2
7 PCIe card slot 3
3 Controller release lever
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Maintenance Procedures 89