Find The Serial Number Of An Array Using The Gui; Find The Serial Number Of An Array Using The Cli - HPE Nimble Storage HF Series Hardware Manual

LED
Power supply
The following table describes the additional controller LEDs in Fibre Channel (FC) arrays.
Table 8: Fibre Channel Controller LEDs
LED
16 Gb/s Fibre Chan-
nel HBA

Find the Serial Number of an Array Using the GUI

Procedure
1. In the NimbleOS GUI, choose Hardware.
2. Click the link of the array you want.
3. Look in the Properties section for the serial number.

Find the Serial Number of an Array Using the CLI

Procedure
1. Find the serial number of an array.
shelf --array array name --list
2. Look for the serial number in the list of information.
Example
$ shelf --array rackarray3 --list
Status
Green LED:
On
On
On
Slow blink
Green and Amber: FC Card failure, boot, or no power:
Green LED:
On
On
Off
Off
Off
Off
Status
In LED: Solid green indicates PSU is working. Off indicates
PSU has failed.
Out LED: Blinking amber indicates power supply is not turned
on.
Green and Amber: FC Card OK, link status:
Amber LED:
2 fast blinks
3 fast blinks
4 fast blinks
Off
Amber LED:
Off
On
Flashing
Slow blink
Off
On
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Status:
OK, link up 4Gb
OK, link up to 8Gb
OK, link up at 16 Gb
OK, link down
Status:
Failure in FW
Failure in FW
Card booting
Failure after POST
No power or bad card
POST failure, possible bad
card
Array Components 58