Initialize The Array Using Hpe Alletra Setup Service; Initial Setup Using The Storage Setup Manager For Windows; Download The Hpe Storage Toolkit For Windows - HPE Nimble Storage HF Series Hardware Manual

7. When the wizard indicates that you have successfully connected the storage array to HPE GreenLake, click Launch to
open HPE GreenLake.
What to do next
Initialize the storage array.

Initialize the Array Using HPE Alletra Setup Service

After you have connected the array to Data Services Cloud Console, initialize the array software using the HPE Alletra Setup
Service.
Before you begin
If you completed the installation checklist, refer to it while completing this procedure.
Procedure
1. From the HPE GreenLake menu, select Applications.
2. On the My Applications page, click Data Services Cloud Console.
3. On the Deployment Regions page, click Launch next to the Data Service Cloud Console instance.
4. On the Welcome page, click Launch in the Setup Service tile.
5. Set up the array using Setup Service. For information on using Setup Service, search for the service in the Data Services
Cloud Console articles widget.
What to do next
You can now use Data Storage Cloud Console - Block Storage to provision storage and manage array settings.

Initial Setup Using the Storage Setup Manager for Windows

After your array has been installed in the rack and connected to your network, you must complete the initial setup of the array
by configuring some basic settings to get the array running on the network and connected to HPE GreenLake.
This chapter describes how to complete the initial setup from a Windows host. If you do not have a Windows host from which
to complete the initial setup, you must use the CLI. For more information, see Initial Setup Using the Array CLI on page 46.
After the initial setup is complete, refer to the GUI Administration Guide or the CLI Administration Guide for group and volume
configuration, and additional optional configuration tasks.

Download the HPE Storage Toolkit for Windows

Download the latest version of the HPE Storage Toolkit for Windows to install on your Windows host or Windows VM.
Important: Make sure that the version of the toolkit is compatible with the version of the operating system on your
array. For compatibility information, see the Validated Configuration Matrix tool, which is available on HPE InfoSight
(https://infosight.hpe.com/resources/nimble/validated-configuration-matrix).
Before you begin
What you need on a Windows server:
Internet connection to HPE InfoSight
.NET Framework 4.5.2
What you need on a Windows client:
Internet connection to HPE InfoSight
Windows OS 7 or later
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Install the HPE Storage Array 41