Insert The Pcie Cage Into The Controller - HPE Nimble Storage HF Series Hardware Manual

1 Rubber tabs
d) Continue to slide the card holder into the PCIe cage until it locks into place.

9. Insert the PCIe cage into the controller.

a) Turn the PCIe cage right side up.
b) For HPE Alletra 5010 or Nimble Storage AF20 and HF20 models: Lower the PCIe cage back into the controller,
making sure that the PCIe cage aligns with the guide pins, and that the riser card with the bridge board connector
aligns with the bridge board. Press down on the top of the PCIe cage ensuring that both riser cards and the bridge
board connector are properly seated. Then replace the controller shroud.
1 Guide pins
2 Riser card
3 Bridge board
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Maintenance Procedures 93