Replace A Dc Power Supply - HPE Nimble Storage HF Series Hardware Manual

Table of Contents

Advertisement

4. Insert the new PSU. Push in gently until you hear a click.
5. Plug in the power cord.
Power is automatically restored to the PSU as soon as the cord is plugged in.

Replace a DC Power Supply

Use this procedure to replace a failed DC power supply unit (PSU) on your HPE storage array or expansion shelf.
One PSU can adequately power the array while the other PSU is being replaced.
Before you begin
Time required:
Parts required:
Information required:
Tools required:
Support contact:
HPE recommends using the Maintenance Window functionality within the HPE InfoSight portal to inform HPE Support of
upcoming maintenance windows.
Refer to https://infosight.hpe.com/dashboards/nimble/wellness/maintenance-windows for more information.
You can disable automated support case generation during planned maintenance from the Manage Maintenance Windows
page. After a maintenance window is set, no further communication with HPE Support is required.
A PSU with an amber LED may have a fault. But an amber LED also indicates:
The external power is switched off with the DC power connected
The power supply is not properly seated in its slot
The array is powered off
A power supply internal fault has occurred
Verify that the power cord is plugged in, then check for and correct these conditions before you assume that the PSU in your
HPE storage array needs to be replaced.
CAUTION:
Before you attempt to replace a power supply:
Do not remove the PSU until you are ready to install the
replacement
Never unplug or unseat both PSUs at the same time
Use only UL-approved power cords
Procedure
1. Identify the failed PSU.
The LED on a failed PSU is amber or dark.
10 to 15 minutes
Replacement DC power supply ordered from HPE
RMA (Return Material Authorization) work order
Case number
Array serial number
ESD (electrostatic discharge) strap or appropriate grounding device
Phillips screwdriver
See Support.
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Maintenance Procedures 101

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents