Install The Hpe Storage Toolkit For Windows On A Client - HPE Nimble Storage HF Series Hardware Manual

.NET Framework 4.5.2
Procedure
1. In your Internet browser, go to http://www.hpe.com/support/storage-welcomecenter
https://infosight.hpe.com/welcomecenter.
2. On the Welcome Center home screen, click the array family.
3. Select the array model and click Continue.
4. In the navigation panel, click Software Configuration > Prepare Client.
5. Follow the instructions to download the toolkit.
6. Save the installation package to your Windows host.
The installation package has a name similar to Setup-HPEStorage-x64.x.x.x.x.exe, where x64 is the
supported microprocessor and x.x.x.x is the version number.
7. Download the latest Toolkit Release Notes.
Review the list of Windows Server hotfixes.
Note: If you are installing the setup manager alone, then no hotfixes are needed. However, .NET framework
requirements still apply. Hotfix requirements are mandatory for any Windows host on which the HPE Storage
Connection Manager for Windows is used to connect to array volumes.

Install the HPE Storage Toolkit for Windows on a Client

You have the option of installing the HPE Storage Toolkit for Windows on a Windows client.
Before you begin
Download the HPE Storage Toolkit for Windows from HPE InfoSight (https://infosight.hpe.com).
See Download the HPE Storage Toolkit for Windows on page 38.
The client must be running Windows OS 7 or later to install the toolkit.
Important: If you plan to install the toolkit in a Remote Desktop session or on a virtual machine, open the Command
Prompt and enter:
mstsc /console
Procedure
1. Open the Setup-HPEStorage-x64.x.x.x.x.zip file and extract the
Setup-HPEStorage-x64.x.x.x.x.exe installer file.
2. On the Windows client, right-click the installer file and choose Run as administrator.
3. In the Welcome to the InstallShield Wizard for the toolkit dialog, click Next.
4. In the License Agreement dialog, choose I accept the terms of the license agreement and click Next.
Important: You must accept the End User License Agreement (EULA) to install the toolkit.
5. In the Logs Directory dialog, do one of the following:
Click Next to accept the default log location.
Click Change, browse to the desired directory, click OK, and click Next.
In the Custom Setup dialog, Setup Manager is selected by default. The setup manager enables first-time setup of the
storage array.
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Install the HPE Storage Array 42