Connect The Power To The Array - HPE Nimble Storage HF Series Hardware Manual

Figure 17: An example of network connections for dual fabric Fibre Channel
1 Host/server
2 Fibre Channel HBA
3 Management port
4 Fibre Channel switch 1
5 Fibre Channel switch 2
6 Ethernet switch
7 Fibre Channel array
8 Data port fc1b on controller A

Connect the Power to the Array

Before you begin
The storage array must be installed in a rack or enclosure and the array must be connected to a network.
9 Management port eth0a on controller A
10 Management port eth0a on controller B
11 Data port fc1a on controller B
12 Host data port connections
13 Management port connections
14 Data fabric 1 connections
15 Data fabric 2 connections
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Install the HPE Storage Array 32