Floor Loading Capacity (As/Ce) - Skyjack SJ12 E Service Manual

Floor loading capacity (AS/CE)

Table 2.14 Floor loading capacity (AS/CE)
Model
min*
SJ12 E
max*
min*
SJ16 E
max*
* Min: Minimum MEWP weight (unloaded platform, no options/attachments)
Max: Maximum MEWP weight (platform loaded to capacity with options orattachments)
** Wheel is the weight that can be experienced on one wheel.
Note: This is more than 25% of the machine weight due to possible weight distribution over the machine and
platform .
*** LCP: Local concentrated pressure is a measure of how hard the MEWP presses on the area in direct contact
with the fl oor/tire.
OFL: Overall fl oor load (Pressure) is a measure of the average load the MEWP imparts on the whole
surface directly underneath the chassis. This has been calculated by dividing the MEWP weight by the
overall fl oor area occupied by the MEWP (on wheels).
Note: The fl oor covering (e.g., tile, carpet, etc.) or the structure (e.g., beams) of the operating surface must
be able to withstand more than the values indicated above .
NOTE
The LCP or OFL that an individual surface can withstand varies from structure to structure and is
generally determined by the engineer or architect for that particular structure .
WARNING
Do not use tires other than the tires that Skyjack specifies for this MEWP . Do not mix different
types of tires or use tires that are not in good condition. Only replace the tires with the same
types that are approved by Skyjack. The use of other tires can make the MEWP less stable. If you
do not obey, there is a risk of death or serious injury.
SJ12 E, SJ16 E, SJ20 E
Total MEWP
weight
Wheel**
913 kg
1140 kg
931 kg
1158 kg
Section 2 – Maintenance Tables and Diagrams
Total MEWP load
LCP***
295 kg 820 kPa
449 kg 1059 kPa
355 kg 910 kPa
510 kg 1167 kPa
OFL***
8.1 kPa
10.1 kPa
8.4 kPa
10.4 kPa
2187AA
241914ACA
35