Platform Assembly - Skyjack SJ12 E Service Manual

Section 2 – Scheduled Maintenance
3
5
2

1.7-7 Platform assembly

Do the inspection that follows:
WARNING
Fall hazard. Use the three points of contact
principle when you use the MEWP to enter or exit
the platform. If you do not obey, there is a risk of
death or serious injury.
1. Enter the platform and close the gate.
Platform, B
1
Make sure there are no loose or missing parts,
▪
and there is no visible damage.
Make sure all railings are correctly installed.
▪
Make sure all fasteners are tight.
▪
Make sure the gate is in good condition and
▪
operates correctly.
Make sure the platform foot pedal is in good
▪
working order, it has no loose or missing parts,
and there is no visible damage.
Fall-protection anchorages,
2
Make sure the fall-protection anchorages are
▪
correctly attached.
Make sure the fall protection anchorages show
▪
no signs of visible damage, deformation, or
cracks.
241914ACA
18
B
Visual and daily maintenance inspections
AC power socket, B
3
Make sure the socket is free of dirt or
▪
blockages.
Platform control console,
4
Make sure the control console is locked with
▪
the lock pin.
Make sure the platform control cable is
▪
correctly locked, and there is no visible
damage.
2. Exit the platform, and close the gate.
Manual storage box,
5
Make sure the operation manual and other
▪
important documents are in the manual
storage box.
Make sure the documents are in good
▪
condition, and you can read them.
4
1
B
B
SJ12 E, SJ16 E, SJ20 E