Tilt Switch
5.5-4 Tilt switch operation
Indicator Lights
Green LED
Red LED
Green & Red LED
SJ12 E, SJ16 E, SJ20 E
The green light is on whenever
both tilt axes are within the
specified degrees of the zero/
home learned position.
It flashes when transitioning in
or out of tilt angle limits, but the
built in time delay has not fully
occurred.
The red light is on whenever tilt
on one or more axes is more
than the specified degrees out
from the zero/ home position.
Both lights are on together
and are solid when a fault is
detected.
Section 5 – Procedures
241914ACA
107