Table of Contents
Advertisement
5. Maintenance
5.1 Care instructions
• The following procedures should be performed regulary.
①Regularly inspect the rotor chamber for check the motor shaft is nomal.
②Rotate the shaft with your hand to make sure it turns smoothly
③Use the stopwatch to check that the time setting is correct
5.2 Cleaning
• Before cleaning the centrifuge, be sure to switch off the device and
disconnect the power cord.
• Oustside of the device
①Clean the outside of equipment with a soft and dry cloth.
②Do not use aggressive chemicals on the device such as Alchol, Benzene, Acetone
or Phenol.
③Use the stopwatch to check that the time setting is correct
▶If the device is contaminated, use a mild cleaning fluid to clean.
④Make sure do not scratch the surface of equipment when cleaning it.
▶Do not use a metal sponge.
▶If the device is rusted, remove it with a mild detergent and wipe it with a dry cloth.
• Chamber
①If the rotor chamber is not dry, wipe moisture from the chamber with a dry cloth.
②If the rotor chamber is dirty, clean the chamber and remove moisture with a dry
cloth.
• Rotor
①To prevent corrosion, remove the rotor from the rotor chamber after finishing
centrifusion.
②If any sample is spilt inside the rotor, wash and dry the rotor well.
• Disposal
①In case of product is to be disposed of, the local wastes laws and regulations are
to be observed.
15 l www.ihanil.com
Advertisement
Table of Contents
