Canon imagePROGRAF iPF8000S Service Manual page 46

Chapter 1
First Level
[System Setup]
[Test Print]
[Information]
*1: Displayed if a roll is loaded.
*2: Displayed if Chk Remain.Roll is On.
*3: Displayed if IP Mode is Automatic.
*4: Only these menus are displayed during printing.
*5: For information on the types of paper the printer supports, refer to the Media Guide. The media type setting in the printer driver and related software (as well
as on the Control Panel is updated when you install Media Configuration Tool from the User Software CD-ROM or if you change paper information by using Media
Configuration Tool.
*6: Available only if Auto Detect is Off.
*7: Available only if NetWare is On.
*8: Follows the setting in Date Format.
*10: Displayed if the Media Take-up Unit is attached.
*12: Displayed if paper is loaded in the tray.
*13: Available if: Take-up Reel is Enable , roll paper is loaded, and you have not executed Auto Feed for the loaded roll.
*14: This menu is only displayed during printing.
*16: Not displayed if a roll or a sheet has been fed.
1-32
Second Level
[Language] [Japanese]*
[English]
[Francais]
[Italiano]
[Deutsch]
[Espanol]
[Pyccknn]
[Chinese]
[Korea]
[Contrast Adj.] -4 to 4
[Reset PaprSetngs] [No]
[Yes]
[Erase HDD Data] [NULL]
[Random Data 1x]
[Random Data 3x]
[Status Print] [No]
[Yes]
[Media Details] [No]
[Yes]
[Print Job Log] [No]
[Yes]
[Menu Map] [No]
[Yes]
[Nozzle Check] [No]
[Yes]
[System Info]
[Error Log] [########-####]
[Job Log] (Choose from information
about the latest three print
jobs.)
T-1-10
Third Level Fourth Level
[No]
[Yes]
[No]
[Yes]
[No]
[Yes]
[Document Name]
[User Name]
[Page Count]
[Job Status]
[Print Start Time]
[Print End Time]
[Print Time]
[Print Size]
[Media Type]
[Interface]
[Ink Consumed]
Fifth Level