Canon imagePROGRAF iPF8000S Service Manual page 163

d. Replacing consumable parts during transportation
During [MOVE PRINTER], if a message to replace consumable parts appear, check the consumable parts counter from service mode and replace the necessary
consumable parts that is over the threshold value of counter in the following table.
See "Service mode" about how to check the counter.
The consumable parts to be replaced and counter to be reset depends on the [LEVEL].
No Part number
[1] QL2-2110
[2] QL2-2108
[3] QL2-1650
[4] QM3-3069
[5] QL2-1663
[6] QM3-1038
[7] QM3-1033
[8] QM3-1034
When replacing consumable parts, check for leaking waste ink. When replacing each consumable part, be careful of leaking waste ink especially from the marked
area [A] and avoid tilting the part when removing.
[6]
[7]
[1]
Name
WASTE INK ABSORBER UNIT
WASTE INK ABSORBER UNIT (L)
WASTE INK ABSORBER UNIT (S)
SUCTION FAN UNIT
DUCT
FAN UNIT
INK SUPPLY MOUNT UNIT (L)
INK SUPPLY MOUNT UNIT (R)
[1] WASTE INK ABSORBER UNIT
[8]
[5]
[6]
[2]
[2]
F-3-59
Service Mode
Q'ty
PARTS xx COUNTER x
1 A1 A
2 A3/A4
1 A5
1 A6
1
2 V1 V
1 If there is waste ink, perform waste ink disposal or parts replacement. And
confirm that the ink leakage has not caused to the surrounding area of ink
1
supply mount unit.
[A]
F-3-60
[4]
[3]
Threshold value
of counter (Unit: Level x (Main menu)
ml)
581 1, 2, 3
143
47
152
241 2, 3
Chapter 3
3-33