1) To remove operation panel [1], open the upper cover and raise the ejection guides. Remove two claws [2] using a flathead screwdriver and disconnect connector

[3] and ground wire [4].

[3]

e) Upper left cover/Upper right cover

Removing the upper left cover/upper right cover

1) To remove upper left cover/upper right cover [1], remove left and right circle covers (L), left and right circle covers (S), left and right side covers and operation

panel.

2) Insert a flathead screwdriver at the position shown in the figure to remove hook [2].

4-8

[4]

[2]

[1]

[2]

F-4-13

F-4-14

[2]

[1]

Table of Contents