Canon imagePROGRAF iPF8000S Service Manual page 301

2. Running change firmware
The specifications have been changed from the versions shown below.
iPF500/600/5000/700: Ver.1.33, iPF510/610/710/8000/9000: Ver.1.36
iPF8100/9100/8000S/9000S: Ver.1.37, iPF810/820/6000S: Ver.1.03
iPF605/6200: Ver.1.02, iPF5100/6100: Ver.1.38, iPF720:Ver.1.10
You can choose A:(default setting) or B:(if you want to use automatic stop) from Service mode.
A: (default setting)
B: (If you want to use
automatic stop)
3. iPF650/750 series, iPF6300/6350/8300 and later model
You can choose A:(default setting) or B:(if you want to use automatic stop) from User mode.
A (Default setting)
B (if you want to use
automatic stop)
Code
(last 4 digits)
2811 Printhead
error
Open top cover and
replace the left
printhead.
Wrong printhead.
Open top cover and
replace the
printhead.
2812 Right printhead
error
Open top cover and
replace the right
printhead.
2813 Left printhead
error
Open top cover and
replace the left
printhead.
No. of non-ejecting more than 0, less than
nozzles 100
1 color (per chip)
more than 100, less
than 200
200 or over
No. of non-ejecting
nozzles
1 color (per chip)
No. of non-ejecting
nozzles
1 color (per chip)
No. of non-ejecting
nozzles
1 color (per chip)
No. of non-ejecting
nozzles
1 color (per chip)
Check printout
Check printhead
Replace printhead
Panel display Panel display
(Large LCD) (Small LCD)
Printhead Replace Printhd
Printhd Err
Replace Printhd
Printhead Right
Replace Printhd
Right Printhd Err
Replace Printhd
Printhead Left
Replace Printhd
Left Printhd Err
Replace Printhd
--- Check printout
--- Check head
Check head Check head
more than 0, less than ---
320
320 or over Head replacement
No. of nozzles impossible to back up
less than 30
more than 0, less than ---
100
more than 100, less ---
than 320
320 or over Replace printhead
more than 0, less than ---
320
320 or over Head replacement
No. of nozzles impossible to back up
less than 30
more than 0, less than ---
100
more than 100, less ---
than 320
320 or over Replace printhead
Error code Applicable printhead
1010 LR or single-head
model
1012 R printhead
1013 L printhead
280C LR or single-head
model
280D R printhead
280E L printhead
2827 LR or single-head
model
2828 R printhead
2829 L printhead
Explanation/Detection sequence
Incompatible printhead version
Incompatible printhead R version
Incompatible printhead L version
30 or over
Check printout
Check printhead
Replace printhead
30 or over
Check printout
Check printhead
Replace printhead
Remedial Action
Replace with a valid printhead.
(An error has occurred but the
printhead itself is not damaged, so
communication has been maintained
properly.)
Replace with a valid printhead.
(An error has occurred but the
printhead itself is not damaged, so
communication has been maintained
properly.)
Replace with a valid printhead.
(An error has occurred but the
printhead itself is not damaged, so
communication has been maintained
properly.)
Chapter 8
8-13