4) Insert the left end of the top stand stay into the side hole [1] on the left stand leg, and insert the right end of the top stand stay into the side hole [2] on the right

stand leg, pushing the stay in completely.

MEMO:

Insert the left end of the top stand stay first. The right end can only be pushed into a restricted position.

5) Secure the top stand stay to the left and right stand legs using the four M8 hex bolts on each side.

6) Attach the leg cover to the left and right stand legs. Insert the protrusion [1] of the leg cover into the groove [2] of the top stand stay. Insert the protrusion [3] of

the leg cover into the groove [4] of the bottom stand stay.

3-6

[1]

F-3-9

[1]

F-3-10

[2]

[1]

[4]

[3]

F-3-11

[2]