Starting and driving
Vehicle parking
Park the vehicle on a flat, solid and safe
•
road that does not affect the traffic of
other vehicles.
When parking, first depress the brake
•
pedal and then use the electric parking
brake until the vehicle stops slowly and
stably, and then place the vehicle in the
P gear.
Do not leave children or people with
limited mobility in the vehicle. They
may release the parking brake and shift
paddle, causing the vehicle to move and
causing casualties.
Vehicle start
Starting procedures
Enter the vehicle with a valid smart key,
depress the brake pedal and start the
vehicle. If the smart key is not in the vehicle
or
subject to
combination instrument display will display
the prompt that the key is not in the vehicle.
As long as all starting conditions are
met, the vehicle will start when the
brake pedal is pressed. After the vehicle is
started, the READY lamp of the combination
instrument is on, and the vehicle enters the
drivable state.
When mobile phones, laptops and
other electronic devices are placed
together with the smart key, the keyless
start function may fail. When this function
fails, keep the smart key at a certain
distance from the electronic devices. Place
the smart key in the storage box below the
rear of the auxiliary instrument panel.
Standby start function
If the vehicle is in a strong signal
interference area, the battery of the smart
key is low, or the keyless start function fails,
if you try to start the vehicle and depress the
brake pedal, the combination instrument
may have a text prompt, and the vehicle
cannot be started through the sensorless
start program at this time.
Please start the engine as per the following
steps:
1.
Place the vehicle in the parking position
(P).
84
some interference, the