Wiper Control Combination Switch - Geely GEOMETRY C 2023 Owner's Manual

be off temporarily when the turn signal lamp
is working.
Follow Me Home
Enable Follow Me Home
On the multimedia display screen, click Set
up → Vehicle Setting → Lamp in turn.
Select any timing in the setting interface of
Follow Me Home, and Follow Me Home is
enabled.
When the vehicle anti-theft is the disarming
state and Follow Me Home is not disabled in
the multimedia display screen, turn the light
combination switch to the AUTO position,
Follow Me Home
automatically after the vehicle is locked.
Disable Follow Me Home
Follow Me Home will be temporarily
disabled if any of the following conditions is
met:
Vehicle power supply is not turned off.
•
Timeout.
•
High beam lamp is on or flashing.
•
can be activated
45
Vehicle description
Follow Me Home timing
On the multimedia display screen, click Set
up → Vehicle Setting → Lamp. Select the
timing in the setting interface of Follow Me
Home as required. When Follow Me Home
is enabled, the timer is set to the preset
timing. Before the timer exceeds, if any door
(including trunk door) is opened and all
doors are closed, the timer will be reset to
the preselected timing time.
Wiper control
switch
Wiper control
switch
1.
Adjusting knob for wipers
2.
Light/wiper control handle
combination
combination
1
2
3
4
5
6
7
8