Geely GEOMETRY C 2023 Owner's Manual page 101

Starting and driving
The current vehicle speed exceeds 60
•
km/h.
The current lane is dotted.
•
The set speed should be high enough for
•
a safe overtaking.
Turn on the left turn signal lamp.
•
In the overtaking assist mode, unexpected
acceleration may occur in the following
situations, which
awareness of the driver. Therefore, at the
overtaking assist mode, the driver should
prepare for sudden change of conditions
and control the vehicle in time.
The vehicle is approaching the turning
•
exit, and the exit direction is the same as
that of usual overtaking.
Before the vehicle passes through and
•
enters the overtaking lane, the speed of
preceding vehicle decreases.
The speed of vehicle in the overtaking
•
lane decreases.
At the overtaking assist mode, unexpected
deceleration may occur in the following
situations, which
awareness of the driver. Therefore, at the
overtaking assist mode, the driver should
prepare for sudden change of conditions
and control the vehicle in time.
The speed of vehicle in the overtaking
•
lane is lower than your vehicle speed.
The longitudinal distance between the
•
vehicle in the overtaking lane and your
own vehicle is close.
The vehicle in the overtaking lane is
•
large with long body, and parallel to your
own vehicle.
requires special
requires special
At overtaking assist mode, the driver
needs to control the lane change on
their own.
Please note that this function can be
enabled in more situations besides
overtaking. E. g., when the left turn signal
indicator is turned on to change lanes or
enter another road, the vehicle will briefly
accelerate.
Start-stop mode
In the cruise following mode, if the
preceding vehicle
gradually, your own vehicle will follow the
preceding vehicle to stop gradually, and
keep a safe distance from it.
Within 3 seconds after stopping, if the
•
preceding vehicle resumes traveling, the
cruise will resume automatically.
When it's more than 3 s after stopping, if
•
the preceding vehicle resumes, the driver
needs to apply the accelerator pedal or
press the intelligent driving button to
resume cruising.
In ACC start-stop mode, the longest time
•
to keep the vehicle stationary is 3
minutes. After 3
activated, and the ACC system exits.
In ACC start-stop mode, if the driver
•
actively exits the ACC, the vehicle will
not start automatically. If the accelerator
pedal is pressed at this time, the vehicle
starts, and the driver needs to take
control of the vehicle and drive safely.
After stopping, the ACC system can
still control the vehicle to move, which
may result in
movement. If
98
brakes and stops
minutes, EPB is
uncontrolled vehicle
the vehicle moves