Geely GEOMETRY C 2023 Owner's Manual page 42

Description of front A/C control
system buttons
1.
A/C setting button
Click this button, and the multimedia
display will automatically turn to the A/C
setting interface.
2.
Front windshield defrosting/defogging
button
To quickly clear the fog or frost on the
front windshield, direct air flow toward
the front windshield. For optimal effect,
clear all ice and snow from the front
windshield before defogging. Turning
the air volume adjustment button while
defogging will increase or decrease the
air volume to accordingly, and the air
outlet mode is kept as the defrosting
mode.
When the front windshield defrosting/
defogging function is enabled, the A/C
and external
automatically turned on. When the
current air volume is lower than the 5
gear, the air
automatically adjusted to the 5
Do not turn off A/C and external
circulation for
defrosting/defogging effect.
When the air conditioner is off, operate
the front windshield
defogging button and the air conditioner
is activated to
windshield
function.
3. Exterior rearview mirror/rear windshield
defrosting and defogging button
Press this button to turn on/off the
exterior rearview mirror/rear windshield
circulation will be
th
volume will be
th gear.
maintaining the
defrosting/
execute the front
defrosting/defogging
defrosting/defogging function. When the
exterior rearview mirror/rear windshield
defrosting/defogging
enabled, the button indicator will be on.
Press this button again to turn off the
exterior rearview mirror/rear windshield
defrosting/defogging function.
Do not use any scraper or sharp tool
to clear frost or other substances on
the inside of the front/rear windshield. To
avoid damage to the rear windshield
defogger grill. Repair caused thereby is not
covered by warranty. Make sure all objects
are at a safe distance from the rear
windshield.
4.
ION button*
Click this button, and when the button
indicator is
generator will be turned on to purify the
air in the vehicle.
5.
Air quality system(AQS) button*
Click this button, when the button
indicator is on, the air circulation mode
will be automatically controlled, and the
internal/external circulation mode will be
automatically
outside air quality is poor.
6.
G-clean button*
When the vehicle is started, click this
button to select whether to enable/
disable the G-clean function.
7.
A/C energy-saving mode button
Click the energy-saving mode button of
the air conditioner to turn on or off the
energy-saving operation mode of the air
conditioner.
8.
Air outlet mode face blowing button
39
Vehicle description
function
on, the negative
switched when the
1
is
2
3
4
ion
5
6
7
8