Driver Assist System; Service Brake; Recuperating - Geely GEOMETRY C 2023 Owner's Manual

Function display
When the IHBC system controls the high
and low beams of the vehicle's headlights,
the indicator is on in white, and when the
IHBC system fails, the IHBC intelligent high
beam status indicator is on in yellow.
When the driver operates the light
control combination switch to select
the high beam, the driver's selection will
take priority.
IHBC is an auxiliary function for light
control. It is recommended to use this
function when driving on high-speed roads,
but the system cannot completely replace
the driver. The driver should always switch
the high and low beam lights according to
the road laws and regulations and according
to the changes in the road environment.
In the following example cases, the
system does not work or only works to
a limited extent, which may require a
personal response from the driver:
In rainstorm, snowstorm, dense fog and
•
other climatic conditions
extremely unfavorable to driving.
Traffic participants (such as pedestrians,
•
cyclists) with poor illumination, railway or
waterway traffic near the road, and the
road infested with wild animals.
In an environment with strong reflective
•
scenery (such as
highways).
When the windshield is fogged, dirty or
•
covered by labels, ornaments, etc.
that are
traffic signs on
121
Starting and driving

Driver assist system

Service brake

The actual braking distance will be different
due to road conditions, vehicle weight and
applied braking force.
distance from the preceding vehicle to avoid
iching and emergency braking.
Do not add non-original accessories
to avoid affecting vehicle performance
and causing traffic accidents.
When depressing the brake pedal, if
there is a sharp metal friction sound at
the brake of the vehicle, go to Geely Service
as soon as possible for maintenance.
Do not depress the brake pedal during
driving. It may cause wear and
overheating of the braking parts and prolong
the braking distance.

Recuperating

The braking system of the vehicle also has
the function of energy recuperating: when
the vehicle is in the drive gear (D), when
sliding or braking, the kinetic energy is
converted into the electric energy, which is
charged into the power battery to recover
energy and improve the driving range of the
vehicle.
1
Keep enough
2
3
4
5
6
7
8