Geely GEOMETRY C 2023 Owner's Manual page 70

Shoulder belt height adjuster
The vehicle is equipped with a shoulder belt
height adjuster at the driver's and front
occupant's seating positions.
Adjust the shoulder belt height adjuster so
that the shoulder belt part of the seat belt is
centered on the shoulder. The seat belt
shall be far away from the face and neck,
and shall not slide under the shoulder.
Incorrect adjustment of the shoulder belt
height will reduce the effectiveness of the
seat belt in the event of a crash.
Press the button as shown above and move
the height adjuster to the desired position.
Move up the adjuster by pressing the button
and pushing the slider trim panel upwards.
After moving the adjuster to the desired
position, release the button and try to move
the adjuster down to make sure it is locked
in place.
Seat belt pretensioner
The seat belt is equipped with a seat belt
pretensioner. In case of vehicle collision, it
will tighten the seat belt to ensure the safety
of occupants. The pretensioner can only
work once. After a collision, it is necessary
to contact the Geely Service to replace the
pretensioner, and it may be necessary to
replace other parts of the seat belt system.
Seat belt unfastening warning
Driver seat belt unfastening warning
When the driver does not fasten the seat
belt, the driver's seat will display red on the
instrument cluster display, and the warning
lamp for unfastened seat belt will also be on.
Front occupant seat belt unfastening
warning
When the front row occupant seat is loaded
with occupants and the front row occupants
are not wearing seat belts, red will be
displayed on the front row occupant seat in
the instrument cluster display, and the
warning lamp for unfastened seat belts will
also be on.
Rear occupant seat belt unfastening
warning
When the rear occupant seat is loaded with
occupants and the rear occupant does not
fasten the seat belt, red will be displayed on
the rear occupant seat in the instrument
cluster display, and the warning lamp for
unfastened seat belt will also be on.
Alarming lamps and buzzer
When the vehicle power supply is in the
•
ON gear or the vehicle is started, the
seat belt alarm will not be triggered
whether the seat belt is fastened or not.
When the vehicle power supply is in the
ON gear or the vehicle is started, if the
driver's or front occupant's seat belt is
not fastened, the seat belt unfastening
warning lamp will be on, and it will not be
off until the driver's or front occupant's
seat belt is fastened. After the buzzer is
67
Safe travel
1
2
3
4
5
6
7
8