Geely GEOMETRY C 2023 Owner's Manual page 105

Hide thumbs Also See for GEOMETRY C 2023:
Table of Contents

Advertisement

Starting and driving
If ICC is activated when the vehicle is
stationary, the system will recognize
the static obstacle ahead as vehicle and
keep still so as to ensure the safe starting of
vehicle and avoid the collision with the
stationary target due to unexpected starting.
Static targets include but are not limited to
speed bumps, trees, people, railings, etc.
When the ICC system works, if the
driver applies the accelerator pedal,
the vehicle will be taken over by the driver,
and respond to the driver's acceleration
desire. The ICC system's control function
will not work.
When entering/exiting a curve, the
target selection may be delayed or
disturbed. ICC may have unexpected
braking or late braking.
If the distance between the ICC
vehicle and the adjacent lane is too
small (or the vehicle on the adjacent lane is
too close to the lane of ICC vehicle), the ICC
system may react to the vehicle and brake.
The visual field of the front camera
shall not be blocked by pollutants.
Especially, when it's completely covered by
snow, the ICC system will exit, and the
information of system exiting will be
displayed
to
the
instrument cluster.
The installation of the front camera
may be affected by vibration or
impact, which will degrade the system
performance. In that case, it is necessary to
recalibrate the front camera.
driver
through
the
In following situations, the driver must
be especially alert:
When the ICC system is activated and
confirmed to start with the vehicle
stationary, if there are children, animals,
tricycles or obstacles ahead of vehicle,
the ICC system cannot detect and
identify them, and there is a serious
collision risk. The driver must confirm the
area ahead of vehicle is safe before
activating the ICC system to control the
vehicle to start.
If the left turn signal lamp is turned on
when overtaking from the left, the ICC
system will automatically accelerate the
vehicle and shorten the distance to the
preceding vehicle. If the vehicle enters
the overtaking lane and there is no
vehicle ahead, the ICC system will
automatically accelerate to the set cruise
speed.
The ICC system cannot detect the items
loaded or accessories mounted on the
target vehicle that protrude from its side,
rear end or roof. If the preceding vehicle
has the above-mentioned special load or
equipment, the ICC system must be
turned
off
vehicles.
Towing a trailer will reduce the dynamics
of the ICC system.
For safety concern, do not use the ICC
system when the visibility is poor, or
when driving along slopes and curved
sections, or on slippery roads (such as
snow, ice, moisture or water sections).
After the system requires the driver to
take over the vehicle, if the vehicle
102
when
overtaking
such

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents