Geely GEOMETRY C 2023 Owner's Manual page 109

Starting and driving
control and lane keeping control; Yellow-
green when the ICC system only performs
cruise control; Gray when the ICC system
fails.
Set speed 7: if the ICC system function is
not activated, the set speed 7 is black. If the
ICC system function is activated, the set
speed 7 is green. In addition, if the ICC
system is turned on, after pressing the main
switch, the set speed 7 is "- km/h" and black.
Cruise control system
The cruise setting speed adjustment and
inter-vehicle interval adjustment methods of
the ICC system are the same as those of
the ACC system. The relevant ICC system
function modes and precautions are the
same as those of the ACC system. For
details, please refer to the introduction of
"Adaptive Cruise Control System (ACC)".
Direction assist control
When the ICC system is activated, identify
the lane lines on both sides. The system can
control the self driving vehicle to keep
driving in the middle of the lane. Then, the
lane shading in the instrument will be
highlighted.
If one or both lane lines are lost, the
intelligent pilot will no longer maintain the
middle control of the lane, but the cruise
control will continue to maintain. Then, the
ICC status indicator will be on in yellow. If
the intelligent pilot recognizes the lane lines
on both sides again, it will automatically
resume the lane middle control. Then, the
ICC status indicator is on in green.
When the vehicle follows the preceding
vehicle at a low speed, the lane line is
blocked by the preceding vehicle or lost
temporarily. The ICC system can control the
direction according to the driving track of the
vehicle in front, and the self driving vehicle
follows the preceding vehicle to slowly move
laterally. Therefore, the ICC system can
continue to maintain cruise control and
direction control. Then, drivers need to pay
special attention to the traffic conditions on
the side of their own vehicles.
Release warning
The precondition of the ICC system is that
the driver holds the steering wheel with both
hands. The system will continuously monitor
this. If the release time exceeds a certain
time, the instrument cluster will display a
release warning message to remind the
driver to hold the steering wheel with both
hands. If the driver has not responded, the
ICC system will exit after the release
warning message is displayed for the
second time.
If the driver puts his hand on the steering
wheel gently for a long time, a release
warning may appear. Then, hold the
steering wheel tightly.
106