Geely GEOMETRY C 2023 Owner's Manual page 149

Emergency
2.
Take out the plastic pliers from the
vehicle tool box, clamp the wheel nut
trim cap with the plastic pliers as shown
in the figure, and pull the trim cap
outward;
3.
Put the wheel wrench on the wheel nut
and turn it counterclockwise to loosen
all the wheel nuts for about one turn, but
do not remove the wheel nuts first;
4.
Place the jack head. Adjust the jack to a
suitable height as shown in the figure,
and then place the jack under the lifting
point;
The vehicle will be damaged and even
may roll over if the supporting position
of the jack is incorrect when the vehicle is
lifted. To avoid personal injury and vehicle
damages, before lifting the vehicle, be sure
to place the jack head at the correct
position.
The vehicle is equipped with a jack,
which can only be used to replace a
flat tire. Do not come below the vehicle
merely supported by lifting jack. If the
vehicle slips off the jack, serious personal
injury or death may result.
5.
Connect the jack handle;
146