Geely GEOMETRY C 2023 Owner's Manual page 95

Starting and driving
When suddenly
•
approaching the vehicle ahead at high
speed (an obvious speed difference with
the vehicle ahead), the driver should
brake in time.
When driving on a steep downslope, it
•
may be difficult for this function to keep a
proper distance from the vehicle ahead.
Under such circumstances, be especially
careful and be ready to brake at any
time. Do not use ACC under heavy load.
ACC cannot identify tricycles, vehicles
•
carrying irregular shaped goods or
vehicles with irregular shapes.
ACC system does
•
stationary or slowly moving vehicles
stably and cannot recognize oncoming
vehicles.
If ACC is activated when the vehicle is
•
stationary, the system will recognize the
static obstacle ahead as vehicle and
keep still so as to ensure the safe starting
of vehicle and avoid the collision with the
stationary target due to unexpected
starting. Static targets include but are not
limited to speed bumps, trees, people,
railings, etc.
When ACC works, if the driver applies
•
the accelerator pedal, the vehicle will be
taken over by the driver, and respond to
the driver's acceleration desire. ACC
control function will not work.
When entering/exiting a curve, the target
•
selection may be delayed or disturbed.
ACC may have unexpected braking or
late braking.
In some cases (the speed of preceding
•
vehicle is too low relative to your own
accelerating and
not recognize
vehicle, and the preceding vehicle jumps
into the lane closely, etc.), ACC does not
have enough time to reduce the relative
speed. In this case, the driver must
respond appropriately.
If the preceding vehicle suddenly brakes,
•
ACC may fail to respond timely or react
too slowly. In this case, the driver will not
receive the takeover request. Active
braking is required.
At a sharp turn, e. g. a serpentine road,
•
ACC cannot detect the preceding vehicle
normally due to the visual field limit of
front camera, which may lead to the
acceleration of ACC vehicle. The driver is
required to respond appropriately based
on actual conditions.
If the distance between the ACC vehicle
•
and the adjacent lane is too small (or the
vehicle on the adjacent lane is too close
to the lane of ACC vehicle), ACC may
react to the vehicle and brake.
In following situations, the driver must
be especially alert:
When ACC is activated and confirmed to
•
start with the vehicle stationary, if there
are pedestrians, children, animals, two-
wheeled vehicles, tricycles or obstacles
ahead, ACC cannot detect and identify
them, and there is a serious collision risk.
The driver must confirm the area ahead
of vehicle is safe before activating ACC
to control the vehicle to start.
In case that the vehicle speed is high, if
•
the left turn signal lamp is turned on
when overtaking from the left, ACC will
automatically accelerate the vehicle and
shorten the distance to the preceding
92