Geely GEOMETRY C 2023 Owner's Manual page 49

Hide thumbs Also See for GEOMETRY C 2023:
Table of Contents

Advertisement

Vehicle description
When the windshield is dry, do not
use wipers. Otherwise the wipers will
scratch the windshield and affect service life
of wiper blades.
If there is dust or sand on windshield, use
wipers after cleaning the dirt at first.
Otherwise the wipers will scratch the
windshield and affect service life of wiper
blades.
Operations of wiper combination
switch
Wiper inching wiping
Turn the adjustment knob to the position
in the direction B for a short pause, and then
release
the
adjustment
adjustment knob will automatically return to
the gear position
perform the inching operation once.
Wipers off
Turn the adjustment knob to the
position to turn off the wiper.
Wiper intermittent wiping
Turn the adjustment knob to the position
in the direction A, and the wiper will perform
intermittent wiping operation.
Automatic wiping of front wipers
Turn the adjustment knob to the position
in the direction A, and the front wiper will
knob.
The
, and the wiper will
gear
perform automatic wiping operation. The
wiping speed is automatically adjusted by
the wiper control system as per rainfall.
Low-speed wiping of wipers
Turn the adjustment knob to the low-speed
gear position
in the direction A, and the
wiper will perform the low-speed wiper
operation.
High-speed wiping of wipers
Turn the adjustment knob to the high-speed
position
in the direction A, and the wiper
will
perform
the
operation.
Front windshield washing
Turn the adjustment knob to the position
in the direction B and keep it still. When the
windshield washer sprays water, the wiper
wipes. When the adjustment knob is
released, the washer stops spraying water.
After cleaning, the wiper remains active for
three cycles. After the interval of 5 seconds,
the wiper wipes for one cycle.
Wiping of rear wipers
Press and release the tail button of the
wiper control handle to select the first gear,
and the rear wiper will continuously wipe.
When the first gear is selected again, the
rear wiper will stop wiping.
Washing of rear windshield
Press the button at the end of the wiper
control handle to select the second gear.
When the rear windshield washer sprays
water, the wiper wipes. After releasing the
button at the end of the wiper control
handle, the washer stops spraying water,
the wiper wipes again several times and
then resets, and the rear wiper continuously
wipes at the same time.
46
high-speed
wiping

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents