Geely GEOMETRY C 2023 Owner's Manual page 171

Repair and maintenance
The tread wear indicator will appear when
the tire tread is worn to 1.6 mm or less. After
the tire wear reaches the limit, replace the
tire as soon as possible.
If the tire is found to be worn unevenly or
you feel some continuous vibration while
driving, go to the Geely Automobile Service
for inspection. When installing new tires, be
sure to perform tire dynamic balancing.
If the tires with shallow tread patterns
or exposed wear marks are used
continuously, it will lead to extended braking
distance, steering failure, tire breakage,
etc., which is easy to cause accidents.
Please dispose of used tires in
accordance
environmental protection laws.
Tire pressure
Type I
Tire pressure labels are posted on this
vehicle. This label is located on the outside
of the left center pillar and indicates the air
pressure of the front and rear wheels of the
vehicle.
with relevant
168
Type II
Tire pressure labels are posted on this
vehicle. This label is located on the outside
of the right center pillar and indicates the air
pressure of the front and rear wheels of the
vehicle.
Tires can work effectively only when
they have correct inflation pressure.
Under inflation or over inflation may
adversely affect the service life of the tires
and the handling performance of the
vehicle, causing the vehicle to lose control.
Tire pressure monitoring system
(TPMS)
The tire pressure monitoring system alerts
the driver to check the tire pressure by
turning on the abnormal tire pressure
warning lamp.
If the abnormal tire pressure warning lamp
is on, it indicates that one or more tires have
abnormal tire pressure. Then, stop the
vehicle as soon as possible, check the tire
pressure and inflate the tire to the correct
tire pressure. The cold tire pressure is
marked at the tire pressure label on the