Geely GEOMETRY C 2023 Owner's Manual page 96

vehicle. If the
overtaking lane and there is no vehicle
ahead, ACC will automatically accelerate
to the set cruise speed.
ACC cannot detect the items loaded or
•
accessories mounted on the target
vehicle that protrude from its side, rear
end or roof. If the preceding vehicle has
the above-mentioned special load or
equipment, ACC must be turned off when
overtaking such vehicles.
Towing a trailer will reduce the dynamics
•
of ACC.
After the system requires the driver to
•
take over the vehicle, if the vehicle
continues to move, the driver must apply
the brake pedal to brake.
Structural modification of vehicle, such
•
as lowering the chassis height or
changing the front license plate mounting
board, may affect ACC.
Function selection
The driver can click Set up → Auxiliary
Driving → CCM on the multimedia display
screen, and select to enable or disable the
adaptive cruise function in this interface.
vehicle enters the
ACC can be selected through the function
menu switch button on the left side of the
steering wheel in the instrument cluster
display screen. When ACC is selected, it will
enter the standby mode, and the ACC
status indicator will be on in white.
Steering wheel control
ACC button is on the left side of steering
wheel.
1.
Adaptive cruise button: press and
release this button to start, stop and exit
the ACC system.
2. Inter-vehicle interval increasing button
Press and release this button to
increase the following distance of ACC
system.
93
Starting and driving
1
2
3
4
5
6
7
8