Adaptive Cruise Control System (Acc) - Geely GEOMETRY C 2023 Owner's Manual

required speed limit. Press the button to set
the current speed as the speed limit.
Resume speed limit
Deeply press the accelerator pedal during
driving, and the automatic speed limit
control enters the driver's control state, and
the indicator of automatic speed limit control
system is on in yellow. But the speed limit is
still memorized. When the accelerator pedal
is released, the automatic speed limit
control resumes, and the indicator of
automatic speed limit control system (LIM)
is on in green.
Use of automatic speed limit
control at ramp
When the vehicle runs downhill, the
automatic speed limit control system cannot
limit the vehicle speed, and the vehicle will
accelerate under its own gravity. At the time,
the vehicle speed should be reduced
immediately by pressing the brake pedal.
End of automatic speed limit
control
Press the button, the status indicator
•
of the automatic speed limit control
system (LIM) will change from green to
white, and the automatic speed limit
control will be in standby mode.
Press the button when the automatic
•
speed limit control is in the standby state,
and the automatic speed limit control will
enter the off state.
Clearing vehicle speed memory
When the automatic speed limit control or
vehicle power supply is turned off, the
speed memory set by the automatic speed
limit control will be cleared.
Adaptive
system (ACC)*
The adaptive cruise control system (ACC)
can control the vehicle speed based on the
set speed and the inter-vehicle interval in
the range of 0~150 km/h.
ACC mainly provides driving assistance for
the driver on highways or elevated roads
with good road conditions. The driver should
keep control of the vehicle at all times.
ACC uses a medium-range radar to detect
the vehicle ahead, and maintain the inter-
vehicle interval set by the driver through
automatic speed adjustment. The driver can
control the vehicle at any time according to
driving conditions.
ACC will start self-test when the
vehicle is powered on, and the system
functions are unavailable at this stage.
ACC is only an auxiliary system, not a
•
warning and collision avoidance system
in case of emergency, and cannot
replace the driver to drive. The driver
must always keep control of the vehicle
and bear full driving responsibility for
vehicle control. The driver needs to drive
in accordance with laws and regulations.
ACC does not work on vehicles or
•
objects crossing the carriageway.
The change of vehicle posture due to
•
excessive load in the luggage area and
other reasons will degrade or disable the
ACC target recognition performance.
91
Starting and driving
cruise control
1
2
3
4
5
6
7
8