Table of Contents
Advertisement
recommended to set the vehicle
power mode to ON or READY.
ON: power supply status of the traction
battery. Without depressing the brake
pedal, turning the key to ON position will
turn the vehicle power supply to ON mode.
When the Start switch is turned to ON
position, depress the brake pedal and turn
the key to START. The vehicle can be
started and enters a drivable status
(READY status).
START: drivable status (READY). Depress
the brake pedal and turn the key to START
position, so that the vehicle will enter
READY status.
The steering wheel has a locking
function, and can be locked after the
key is removed. If it is found that the
key is not easy to rotate after
inserting the key, turn the lower
steering wheel left and right slightly.
Vehicle starting procedure
Starting procedure
Turn the key to different power positions
as required. To drive the vehicle, depress
the brake pedal and turn the key to START.
The vehicle is ready for driving (READY).
When it is confirmed that the READY
indicator on the instrument cluster
and the vehicle can run normally,
observe the SOC display of the
instrument cluster at this time to
understand the battery capacity of
the vehicle before arranging the
vehicle traveling plan. When the SOC
of the vehicle is lower than 30%, it is
recommended to recharge before
driving, so as not to add unnecessary
trouble to the trip.
Vehicle start failure
Before inspection, the vehicle must be
started according to the correct starting
procedure of
"starting the
confirm whether the power battery and
low-voltage battery have enough power.
Before
starting
whether any fault warning lamp on the
instrument cluster illuminates. If yes, it may
be caused by system failure of the vehicle.
Please contact a Farizon Auto after-sales
service station for maintenance.
This vehicle is equipped with an electronic
anti-theft system. Check whether the
vehicle can be started by using other spare
keys. If the vehicle can be started, your
intelligent key may be out of order. Hand
over your key to a Farizon Auto after-sales
service station for maintenance. If all your
keys fail, the system may be faulty. Please
contact a Farizon Auto after-sales service
station for maintenance as soon as
possible.
If you find that sometimes the vehicle fails
to start:
1.
Check whether the intelligent key has
insufficient power.
2.
Check whether the vehicle is equipped
with radio interference equipment.
3.
Check whether the battery terminal is
tightened and clean.
4.
If there is no problem with the wiring
terminal of low-voltage battery, it may
be that the low-voltage battery has run
out. You can try to start by jumping.
Please refer to
85
Starting and driving
vehicle", and
the
vehicle,
observe
"Jump Start"
in Chapter
6
Advertisement
Table of Contents
