Geely GEOMETRY C 2023 Owner's Manual page 47

Vehicle description
This system
priority function in automatic work
mode; the system will exit automatic
lamplight mode if there is lamplight signal
input.
Position lamp
Push the light control switch to the position
in the direction B, and the position lamp
is on. Push the light control switch to the
position in the direction A, and the
position lamp is off.
Low beam
Push the light control switch to the position
in the direction B, and the low beam lamp
is on. Push the light control switch to the
position or in the direction A, and the
low beam lamp is off.
Rear fog lamp
On the premise that the low beam lamp is
on, push the light control switch to the
position in the direction B, and the rear
fog lamp is on. Push the light control switch
to the position in the direction A, and the
rear fog lamp is off.
Switching between high/low beam
On the premise that the low beam lamp is
on, turn the handle to the extreme position
in the direction E to turn on the high beam
lamp. Push the light switch handle in the
direction E again to the limit position, and
the high beam lamp is off.
High beam flashing
Turn the handle in the direction F to the limit
position, and the high beam lamp flashes.
Release the handle, and the high beam
lamp will automatically turn off. Repeat the
operation to flash the high beam lamp.
has manual-control-
Turn signal
Turn the handle in the direction C/D to the
limit position, and the right/left turn signal
lamp flashes. After turning, the handle will
automatically return to its original position,
and the turn signal lamp is off.
Lane changing lamp function
Turn the handle in the direction C or D to the
middle gear. Release it and the handle will
automatically return, and the right/left turn
signal lamp will flash.
Headlamps height adjustment
According to the number of occupants and
the load of the vehicle, turn the headlamp
height adjustment knob up and down to
adjust the headlamp beam height.
Daytime driving lamp
After the vehicle is started and the low beam
lamp is off, the daytime driving lamp will be
on.
When the low beam lamp turns on, the
daytime driving lamp automatically is off.
For the configuration where the
daytime driving lamp is integrated into
the headlamp, the daytime driving lamp will
44