Geely GEOMETRY C 2023 Owner's Manual page 126

EPB automatic parking
When the vehicle power supply is in the
OFF gear, EPB will automatically park.
Disable EPB automatic parking function
(vehicle washing mode)
In vehicle washing,
activation function of the electric parking
brake is not required, the EPB can be
released before the vehicle power is turned
off, and then the EPB switch can be pressed
until the vehicle power is turned off, then the
vehicle will not park automatically.
If the warning lamp of the electric parking
•
brake system is on after the automatic
parking function is disabled, it indicates
that the electric parking brake system is
faulty. Please contact Geely Automobile
Service for maintenance.
If the electronic parking brake system
•
cannot be enabled, the rear wheels
should be locked to prevent the vehicle
from moving, when necessary.
Improper use of the EPB may cause
personal injury or death.
Do not use the electric parking brake for the
service brake of the vehicle except in an
emergency. In the state of electric parking
brake, do not depress the accelerator pedal
when the vehicle is started and the driving
gear is engaged.
When the EPB is released, the vehicle
will lose its parking function. To avoid
vehicle damage, serious personal injury, do
not perform this operation on a sloping road.
if the automatic
123
Starting and driving
When the vehicle
automatically and needs to move, the
vehicle needs to be started, the gear is
switched to neutral (N), and the EPB is
released manually.
AUTO HOLD
The AUTO HOLD function can help the
driver to start more comfortably on sloping
roads. After releasing the brake pedal, the
system holds braking, so that the driver has
enough time to depress the accelerator
pedal to start, reducing the impact of sliding.
Depending on the stress, the vehicle
may move even when AUTO HOLD is
activated.
On the multimedia display screen, click Set
up → Vehicle Setting → Vehicle control in
turn. In this interface, select to enable or
disable the automatic parking function.
AUTO HOLD function enabled
When the power system is in operation, the
driver's door is closed, the seat belt is
fastened, and the Auto Hold function is
enabled through the multimedia display
screen.
is washed
1
2
3
4
5
6
7
8