Geely GEOMETRY C 2023 Owner's Manual page 9

Notes to users
High voltage safety
The following information can protect the
safety of occupants and first-aid personnel
in the vehicle from high-voltage electricity:
The high-voltage fuse (inside the power
•
battery) provides short circuit protection
for the power battery.
The positive and negative high-voltage
•
cables connected to the power battery
are usually controlled by the high-voltage
relay. When the vehicle high-voltage
power supply is disconnected, the relay
is disconnected to prevent current from
flowing out of the power battery.
The vehicle power supply can be
•
reduced to the safe voltage for human
touch only after 5 minutes of cutting off.
To prevent serious injury or even death
due to severe burns or electric shock, do
not touch, cut off or damage any orange
high-voltage cables
components.
Both positive and negative cables are
•
insulated from the metal body. High
voltage current will not flow through the
metal body through these cables. As the
metal body is insulated from high-voltage
components, it is safe to touch the metal
body.
Warning message
In case of power system failure or user's
•
improper operation, the combination
instrument will
warning message. Please read the
message and follow its instructions. If the
warning lamp is on, a warning message
is displayed. Or if the battery fails, the
power system may not be started. In this
or high-voltage
automatically display
case, try to start the system again. If the
ready for operation indicator is not on,
contact Geely Service for maintenance
as soon as possible.
When the impact sensor detects a
•
certain degree of impact, the system and
high-voltage current output will be cut off
in an emergency to minimize the risk of
electric shock. If the emergency cut-off
system is activated, the vehicle cannot
be restarted. To restart the vehicle,
contact Geely Service for maintenance.
This vehicle is equipped with high
voltage DC and AC systems and 12 V
low voltage system. High voltage DC and
AC equipment systems are very dangerous
and may cause serious casualties in case of
failure.
Important tips
Please check tire wear and tire pressure
•
regularly as
recommended herein and tire pressure
requirements.
Always use
•
recommended
conduct maintenance
Warranty and Maintenance Manual.
Safety precautions
The high voltage value of the vehicle is
•
about 400V. Do not touch any high
voltage components with bare hands
without disconnecting the high voltage.
High voltage components include: drive
motor controller, power harness device,
on-board charger, high voltage main
cable, fast charging plug, fast charging
socket, power battery, drive motor, slow
6
per the methods
the oil and fluid
in this manual and
as per the