The freezing point temperature of the
washer liquid should be 10° C lower
than the local minimum temperature.
Repair and maintenance
Wiper blades
Replacement of wiper blade
Grease, silicon and petroleum products
•
will weaken the wiping effect of wiper
blades. Wash wiper blades in warm soap
water
and
regularly.
Wash windshield frequently, and avoid
•
using wiper blade to wipe sands on
windshield so as to avoid affecting wiping
effect of wiper blades and reducing their
service life.
It is necessary to replace wiper blades if
•
the rubber is found to be hardened or
have cracks, or if wipers leave scratch on
windshield glass or cannot reach a
certain area.
Clean windshield glass regularly with
•
qualified glass liquid detergent, and
ensure to clean windshield thoroughly
before replacing wiper blades.
Only
use
wiper
•
specification as original wiper blades.
If a wiper or a windshield is covered by
•
ice or snow or is frozen, it is necessary to
remove ice and snow on the wiper or the
windshield before using the wiper, so as
to
prevent
the
damaged.
Do not use the wipers when a windshield
•
surface is dry or there are hard objects
on the surface; otherwise it is possible to
damage wiper blades and windshield.
163
check
their
conditions
blades
of
same
wiper
from
being
1
2
3
4
5
6
7
8
Need help?
Do you have a question about the GEOMETRY C 2023 and is the answer not in the manual?
Questions and answers