Geely GEOMETRY C 2023 Owner's Manual page 43

Vehicle description
Click the button to select the air outlet
mode as the face blowing mode.
9.
Air outlet mode foot blowing button
Touch the button to select the air outlet
mode as the foot blowing.
10.
Air outlet mode window blowing button
Touch the button to select the air outlet
mode as the window blowing.
11.
Seat heating/ventilation button*
Click this button, and the multimedia
display screen will automatically jump to
the seat heating and ventilation setting
interface.
12.
OFF button
When the air conditioner is working,
press OFF button and the running of the
entire A/C system will stop.
13.
AUTO button
Press this button
automatic mode of the air conditioner.
When the automatic mode is enabled,
the air conditioning system will enter the
automatic control state according to the
set temperature.
14.
A/C button
Press this button to turn on the air
conditioner, and the A/C button indicator
will be on. Press this button again, the
button indicator will be off, and the
compressor will be turned off.
When the air conditioner is off, press A/
C button and the air conditioner is
activated.
15.
A/C MAX button
Touch the A/C MAX button, and the set
temperature is automatically adjusted to
the minimum, and the air volume to the
maximum.
16.
Interior/exterior circulation switch button
to enable the
40
Press this button to manually switch
between external circulation (fresh air)
and internal circulation. In the automatic
air quality control system (AQS) mode,
the internal/external circulation vent
status is automatically
according to the outside air quality.
When the air conditioner is off, press the
internal/external
button, and the air conditioner is still off,
but the internal/external circulation will
be switched.
17.
Dual zone control button
Click the button to enable the dual zone
control function. Then, the button icon
will be highlighted, and the temperature
on the driver's side and the front
occupant's side
simultaneously.
synchronization button again, the button
icon will not be highlighted, and the
temperature on the driver's side and
front occupant's side can be adjusted
independently.
18.
Air volume adjustment button
Press this button to adjust the air
volume of the air conditioner.
When the air conditioner is turned off,
operate the air volume adjustment
button, and the air conditioner will be
activated for operation.
19. Front occupant
adjustment button
Adjust the temperature at the front
occupant side. Touch ∧ or ∨ above
and below the temperature value, to set
the temperature higher or lower by 0.5°
C. The temperature setting range of the
air conditioner is 17.5 ℃~31.5 ℃. When
adjusted
circulation switch
will be adjusted
Click the
side temperature