Western Digital OpenFlex Data24 Manual page 9

EcoDesign Disclosures
Figure 1: Move CMA Assembly into a Servicing State
Step 3 : Disconnect the power and data cables from the enclosure.
a. Unclip the retention strap as shown in the following image.
Figure 2: Unclipping Cable Retention Strap (Generic PSU Shown)
b. Move to the rear of the rack and disconnect the power cables from each of the two Supply
Unit (PSU).
1. EU EcoDesign Disclosures
1.4 OpenFlex ™ Data24 Disassembly
5