Western Digital OpenFlex Data24 Manual page 31

EcoDesign Disclosures
Figure 45: PDB-A Screw Locations
b. Using a T10 Torx screwdriver, remove the four (4) screws holding PDB-A to the midplane:
Figure 46: PDB-A Screw Locations
c. Carefully pull PDB-A upward to separate it from its connector on the midplane and remove it
from the Chassis:
Caution: To prevent damage to the PDB leads and midplane connector, do not
twist or torque the PDB when removing it from the midplane.
1. EU EcoDesign Disclosures
1.4 OpenFlex ™ Data24 Disassembly
27