Western Digital OpenFlex Data24 Manual page 10

EcoDesign Disclosures
Figure 3: Disconnect Power Cables
c. Disconnect the Ethernet Cable from the RJ45 Ethernet Management port.
Figure 4: Disconnect RJ45 Ethernet Cables
d. Disconnect the QSFP28 cables from all of the IOM ports.
Figure 5: Disconnect QSFP28 Cables
Step 4 : (Optional)
Uninstall the Drive Assemblies.
Step 5 :
a. At the front of the enclosure, press the release button on the front of a Drive Assembly. The
release handle will rotate outward:
Repeat the previous step to move the remaining arm into the servicing state.
1. EU EcoDesign Disclosures
1.4 OpenFlex ™ Data24 Disassembly
6