Western Digital OpenFlex Data24 Manual page 40

EcoDesign Disclosures
Figure 61: PCIe Support Bracket Removal
Step 5 : Using a T10 Torx screwdriver, remove the three (3) screws holding the AICs to the PCIe support
bracket:
Figure 62: AIC Screw Locations
Step 6 : Carefully pull each AIC upward to separate its leads from the connector on the IO Module (IOM)
riser PCB:
1. EU EcoDesign Disclosures
1.5 IO Module (IOM) Disassembly
36