Western Digital OpenFlex Data24 Manual page 32

EcoDesign Disclosures
Figure 47: PDB-A Removal
Remove the bottom drive guide plate.
Step 20 :
a. Using a T7 Torx screwdriver, remove the eighteen (18) screws holding the bottom drive guide
plate to the Chassis. There are 9 screws inside each drive bay, and their locations mirror each
other. The left-side screws are shown in the following image:
Figure 48: Drive Guide Plate Screw Locations
b. Using a T7 Torx screwdriver, remove the six (6) screws from underneath the front lip of the
drive guide plate:
1. EU EcoDesign Disclosures
1.4 OpenFlex ™ Data24 Disassembly
28