Western Digital OpenFlex Data24 Manual page 19

EcoDesign Disclosures
Figure 21: Fan Backflow Guard Screw Locations
b. The fan backflow guard is a single piece of flexible material; remove it by lifting it away from
the Chassis:
Figure 22: Fan Backflow Guard Removal
Step 12 : Remove the System Fan modules.
a. Each System Fan module has a rounded notch and a rectangular notch with a retaining clip.
Place your thumb and index finger into the notches, squeeze to release the tension clip, and
pull upward on the System Fan module to remove it from the Chassis:
1. EU EcoDesign Disclosures
1.4 OpenFlex ™ Data24 Disassembly
15